Stainless steel sheet and plate
Cold rolled sheet, hot rolled plate and coil in grades 201, 304/304L, 316/316L, 321 and 310. Thickness from 0.01 mm foil to 500 mm plate, width up to 2,500 mm, cut to length on ten coil lines.
Specification
| Parameter | Range |
|---|---|
| Thickness | 0.01 mm – 500 mm |
| Width | up to 2,500 mm |
| Length | Cut to length from coil, or fixed plate sizes |
| Finishes | 2B, BA, No.4, hairline, 8K mirror |
| Standards | ASTM A240, A480; EN 10088-2 |
| Tolerance | ASTM A480 (thickness, flatness, width) |
| Edge | Mill edge or slit edge, deburred on request |
Choosing a finish by what it has to survive
| Finish | Surface | Use it for |
|---|---|---|
| 2B | Cold rolled, annealed, pickled, skin passed | General fabrication, tanks, machine guards |
| BA | Bright annealed, reflective | Food contact, architectural, visible panels |
| No.4 | Brushed, short linear grain | Kitchen equipment, lift panels, shopfitting |
| Hairline | Long fine grain | Appliance fronts, column cladding |
| 8K | Mirror polished | Decorative, signage, sanitary ware |
Thickness tolerance is where sheet disputes come from
A 3 mm sheet that measures 2.85 mm is within ASTM A480 tolerance for that thickness and width, and it is also 5% less steel than you paid for. On a container of plate, that difference is the whole margin. We state the permitted deviation on the quotation and the measured values on the inspection record, so the argument cannot happen after arrival.
Packing
- Interleaved with paper or film to prevent surface marking in transit
- Wooden crate or eye-to-sky packing depending on handling at destination
- Bundle weight and dimensions printed on the packing list
- Pre-shipment photographs of packing and markings as standard
Questions about sheet and plate
What is the thinnest sheet you supply?
0.01 mm foil, produced by rolling rather than slitting. Below about 0.3 mm, handling and packing dominate the cost, so ask for a quote rather than assuming a coil price per tonne.
Can you supply 1,500 mm wide coil?
Yes, up to 2,500 mm width depending on thickness. Narrow slit coil and strip are cut on the same lines.
Do you supply to ASTM or EN?
Both. ASTM A240 / A480 is standard for North American buyers; EN 10088-2 for European specifications. The certificate names the standard used.
Is the plate supplied with a mill test certificate?
Yes, EN 10204 3.1 with heat number and mechanical properties, plus the RoHS verification for the plate line, certificate CTGS2604010066R.
Can you protect the surface for visible applications?
Yes — PVC film or interleaved paper. Tell us the application, because film choice depends on whether the part will be laser cut, bent or welded afterwards.