Stainless steel pipe and tube
Seamless and welded austenitic stainless pipe, from 1 mm instrumentation tube to 1,500 mm outside diameter. Grades 201, 304/304L, 316/316L, 321, 310, 347 and 904L. Schedules SCH 20 to SCH 80, with lengths up to 30 m.
Specification
| Parameter | Range |
|---|---|
| Outside diameter | 1 mm – 1,500 mm |
| Wall thickness | 0.1 mm – 150 mm |
| Schedules | SCH 20 / 30 / 40 / 50 / 60 / 70 / 80 (SCH 80 is our maximum — ASME B36.19 ends at SCH 80S for stainless) |
| Length | Random 5–7 m, or cut to length up to 30 m |
| Tolerance | ASTM A999 or EN 10216-5 — both available, stated on the order |
| Surface | Pickled and annealed as standard; bright annealed and polished on request |
| Standards | ASTM A312, A213, A269, A554; EN 10216-5 |
| Ends | Plain, bevelled, threaded, or with caps |
Why the tolerance standard matters more than the grade
Two suppliers can both quote 316L and still deliver different pipe, because ASTM A999 and EN 10216-5 permit different wall deviation. If your drawing cites one and the mill certificate references the other, the material is technically compliant and practically wrong for your application. We ask which system applies before quoting, and the certificate names the standard that was used.
Seamless or welded
Seamless for pressure, high temperature and where a longitudinal weld is not acceptable to your specification. Welded with filler or without, for structural and process lines where the cost difference matters. Both are produced in-house: five piercing mills for seamless, twenty automatic welding machines for welded.
What ships with the pipe
- Mill test certificate EN 10204 3.1 with heat number, chemical composition and mechanical properties
- Hydrostatic or eddy current test results as specified
- Dimensional inspection record against the nominated tolerance standard
- PMI report — in-house on incoming and finished material, subcontracted for grades outside our analyser range
- RoHS verification of conformity, certificate CTGS2604010079R
- Pre-shipment photographs of bundle tags and end protection
Questions about pipe supply
What is the largest pipe you can supply?
Outside diameter up to 1,500 mm with wall up to 150 mm, and cut lengths up to 30 m. Large-diameter and long-length orders are made to order rather than stocked, so lead time is quoted against the mill schedule.
Can you supply SCH 160 or XXS?
Our maximum is SCH 80. ASME B36.19 stops at SCH 80S for stainless steel; heavier walls fall under B36.10 schedules which we do not stock. If your line needs SCH 160, we will say so rather than quote and substitute.
Can you provide EN 10216-5 material instead of ASTM?
Yes. State the EN grade and we will quote the equivalent with the EN certificate. Both tolerance systems are available and both are stated on the order, because the permissible wall deviation differs between them.
Do you cut to length?
Yes, up to 30 m, with the cut end deburred and protected for transport. Cut lengths are quoted as a separate line so you can see what the cutting adds.
Is the pipe pickled and annealed?
Pickled and annealed is standard for seamless and welded pipe. Bright annealed and polished finishes are available on request, with the finish stated on the certificate.
Can I inspect before shipment?
Yes. We book SGS, Bureau Veritas, Intertek or TÜV by default, or work with the agent you appoint, and the agency invoices you directly where possible.
What is the MOQ for pipe?
Published minimums on pipe and tube items run from 1 kg to 100 kg on selected stock sizes, and 1 t for made-to-order. Several sizes can be combined into one lot to reduce the effective minimum.